The optics on the CNS switch were changed yesterday afternoon. This
resolved the problem.
On 06/22/2015 10:26 AM, Steve Howard wrote:
> FYI: There is a problem with the 10Gig link between the CNS switch
> (Ten0/9) and the Juniper switch (xe-0/0/29).
>
> The Juniper reports low receive light level and drops/restarts the
> link. After a few rounds of this, the CNS switch err-disable's the port
> due to link flapping. Our friends at Cologix worked on the fibers over
> the weekend, but there was no improvement. We'll ship some new optics
> for the CNS switch to 511. Does anybody near 511 have a spare 10Gig
> optic for the Juniper switch that can be swapped in temporarily to help
> troubleshoot the problem?
>
|