Thanks Jeremy.

That was the case. A code upgrade last night changed the syntax of the BPDU blocking code.

It should be resolved now.

Dan




On 3/24/16, 10:19 AM, "MICE Discuss on behalf of Jeremy Lumby" <[log in to unmask] on behalf of [log in to unmask]> wrote:

>I took a look at your port, and it appears that it is down because the switch has detected you sending BPDUs
>
>show interfaces xe-0/0/10
>Physical interface: xe-0/0/10, Enabled, Physical link is Down
> Interface index: 197, SNMP ifIndex: 663
> Description: Longlines
> Link-level type: Ethernet, MTU: 9216, Speed: 10Gbps, Duplex: Full-Duplex,
> BPDU Error: Detected, MAC-REWRITE Error: None, Loopback: Disabled,
> Source filtering: Disabled, Flow control: Enabled
> Device flags : Present Running Down
> Interface flags: Hardware-Down SNMP-Traps Internal: 0x0
> Link flags : None
> CoS queues : 8 supported, 8 maximum usable queues
> Current address: a8:d0:e5:ba:37:cd, Hardware address: a8:d0:e5:ba:37:cd
> Last flapped : 2016-03-24 10:28:52 CDT (00:00:26 ago)
> Input rate : 0 bps (0 pps)
> Output rate : 0 bps (0 pps)
> Active alarms : LINK
> Active defects : LINK
> Interface transmit statistics: Disabled
>
> Logical interface xe-0/0/10.0 (Index 113) (SNMP ifIndex 674)
> Flags: Device-Down SNMP-Traps Redundancy-Device 0x0 Encapsulation: ENET2
> Input packets : 2986181
> Output packets: 13232054
> Protocol eth-switch
> Flags: None
>
>-----Original Message-----
>From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Dan Winkel
>Sent: Thursday, March 24, 2016 10:01 AM
>To: [log in to unmask]
>Subject: [MICE-DISCUSS] Port Down
>
>Hey All,
>
>I just saw our port to MICE go down. Is there anything going on?
>
>Thanks,
>Dan