 |
 |
On Sep 20, 2011, at 2:46 PM, David Farmer wrote: > On 9/20/11 14:37 CDT, Jay Hanke wrote: >>> CNS has received a request from one of its customers for a direct connection >>> to MICE. >> >> This has come up before. I've been recommending that the carriers sell >> it as Ethernet transport and then pop into a "fresh" MICE access port >> so each carrier ends up with their own port. >> >> I don't see any problem placing a remote switch outside the Twin >> Cities. I would disable spanning tree. If we haven't already, we >> should disable spanning tree in the core switches or place a guard so >> the port goes down if a BPDU comes in. > > NO!!!!! DON'T Disable Spanning Tree. But we do need to think about Root Bridge and Root Guard issues. But Spanning tree is important in loop prevention, accidents do occur and spanning tree and prevent one of these accidents from turning into a broadcast storm. > > The best Idea is to design a loop free topology have spanning tree running to ensure the no loops occur by accident, which they more than likely will. If you're going to do that, make sure that spanning tree is running in fast convergence mode or you are asking for different brands of trouble. Unfortunately, fast converging spanning tree tends to be vendor-specific. Owen > >> Jay >> >> ######################################################################## >> >> To unsubscribe from the MICE-DISCUSS list, click the following link: >> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > -- > =============================================== > David Farmer Email:[log in to unmask] > Networking & Telecommunication Services > Office of Information Technology > University of Minnesota > 2218 University Ave SE Phone: 612-626-0815 > Minneapolis, MN 55414-3029 Cell: 612-812-9952 > =============================================== > > ######################################################################## > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1