 |
 |
My internal monitoring (via SmokePing) shows ping packet loss between 15:20 and 16:10 to the MICE route servers. As others have mentioned I don't show any BGP or traffic volume issues, and everything looks OK now. I believe the only change today was adding ports to the Netflix LAG this morning at ~11:15, the last time the MICE route server configuration changed was August 13th. Will continue to look for relevant data points... Anthony Anderberg Sr. Systems Analyst 320-234-5239 [log in to unmask] www.nutelecom.net -----Original Message----- From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Jeremy Lumby Sent: Monday, October 05, 2015 4:56 PM To: [log in to unmask] Subject: Re: [MICE-DISCUSS] MICE Route Server issues? Just noticed that the utilization graphs were missing data from this afternoon, however not the graphs from the CNS switch, which I assume is on another netblock. -----Original Message----- From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Anton Kapela Sent: Monday, October 05, 2015 4:33 PM To: [log in to unmask] Subject: Re: [MICE-DISCUSS] MICE Route Server issues? Observing same issues here pinging same route severs from any source netblock in AS16842. -Tk > On Oct 5, 2015, at 4:10 PM, James Stahr <[log in to unmask]> wrote: > > The exchange *seems* fine, but I can't reliably ping the route servers right now. My BGP sessions to them are up and stable, but ICMP isn't operating "normally" - has anything changed? This started at 15:24 CDT today: > > [stahr@ctg-bastion ~]$ ping -c 10 206.108.255.1 PING 206.108.255.1 > (206.108.255.1) 56(84) bytes of data. > 64 bytes from 206.108.255.1: icmp_seq=7 ttl=59 time=7.06 ms > > --- 206.108.255.1 ping statistics --- > 10 packets transmitted, 1 received, 90% packet loss, time 9000ms rtt > min/avg/max/mdev = 7.062/7.062/7.062/0.000 ms [stahr@ctg-bastion ~]$ > ping -c 10 206.108.255.2 PING 206.108.255.2 (206.108.255.2) 56(84) > bytes of data. > 64 bytes from 206.108.255.2: icmp_seq=2 ttl=59 time=7.13 ms > 64 bytes from 206.108.255.2: icmp_seq=6 ttl=59 time=6.98 ms > 64 bytes from 206.108.255.2: icmp_seq=7 ttl=59 time=6.94 ms > 64 bytes from 206.108.255.2: icmp_seq=10 ttl=59 time=7.05 ms > > --- 206.108.255.2 ping statistics --- > 10 packets transmitted, 4 received, 60% packet loss, time 9001ms rtt > min/avg/max/mdev = 6.942/7.028/7.135/0.093 ms [stahr@ctg-bastion ~]$ > ping -c 10 206.108.255.52 PING 206.108.255.52 (206.108.255.52) 56(84) > bytes of data. > 64 bytes from 206.108.255.52: icmp_seq=1 ttl=61 time=14.0 ms > 64 bytes from 206.108.255.52: icmp_seq=2 ttl=61 time=14.5 ms > 64 bytes from 206.108.255.52: icmp_seq=3 ttl=61 time=14.0 ms > 64 bytes from 206.108.255.52: icmp_seq=4 ttl=61 time=13.6 ms > 64 bytes from 206.108.255.52: icmp_seq=5 ttl=61 time=13.0 ms > 64 bytes from 206.108.255.52: icmp_seq=6 ttl=61 time=12.7 ms > 64 bytes from 206.108.255.52: icmp_seq=7 ttl=61 time=12.2 ms > 64 bytes from 206.108.255.52: icmp_seq=8 ttl=61 time=11.7 ms > 64 bytes from 206.108.255.52: icmp_seq=9 ttl=61 time=11.2 ms > 64 bytes from 206.108.255.52: icmp_seq=10 ttl=61 time=11.9 ms > > --- 206.108.255.52 ping statistics --- > 10 packets transmitted, 10 received, 0% packet loss, time 9002ms rtt > min/avg/max/mdev = 11.289/12.913/14.502/1.052 ms [stahr@ctg-bastion > ~]$ > > > Any new policing policy applied today? I seem to be able to ping normally if I use my 206.108.255.x address, but not reliably from any other address: > > r-pop-min-1#ping 206.108.255.1 repeat 100 source gig0/0/5 Type escape > sequence to abort. > Sending 100, 100-byte ICMP Echos to 206.108.255.1, timeout is 2 seconds: > Packet sent with a source address of 206.108.255.26 > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Success rate is 100 percent (100/100), round-trip min/avg/max = 1/1/1 > ms r-pop-min-1#ping 206.108.255.2 repeat 100 source gig0/0/5 Type > escape sequence to abort. > Sending 100, 100-byte ICMP Echos to 206.108.255.2, timeout is 2 seconds: > Packet sent with a source address of 206.108.255.26 > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Success rate is 100 percent (100/100), round-trip min/avg/max = 1/1/1 > ms r-pop-min-1#ping 206.108.255.1 repeat 100 source loop1 Type escape > sequence to abort. > Sending 100, 100-byte ICMP Echos to 206.108.255.1, timeout is 2 seconds: > Packet sent with a source address of 205.173.182.62 > ...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Success rate is 97 percent (97/100), round-trip min/avg/max = 1/1/1 ms > r-pop-min-1#ping 206.108.255.2 repeat 100 source loop1 Type escape > sequence to abort. > Sending 100, 100-byte ICMP Echos to 206.108.255.2, timeout is 2 seconds: > Packet sent with a source address of 205.173.182.62 > ...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Success rate is 97 percent (97/100), round-trip min/avg/max = 1/1/2 ms > r-pop-min-1# > > > -James