 |
 |
Please allocate ge-2/0/0 to route server 2. There is no change in IP address. I'm blocked from announce. Can someone else get the notification together for the announce list? On Thu, Sep 29, 2016 at 3:41 PM, Jeremy Lumby <[log in to unmask]> wrote: > I will donate one > > -----Original Message----- > From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Jason Hanke > Sent: Thursday, September 29, 2016 3:33 PM > To: [log in to unmask] > Subject: Re: [MICE-DISCUSS] EX4200 (1G Switch) Packet Loss -> 10G Participants > > Do we have a copper SFP for the Route Server connection? > > On Thu, Sep 29, 2016 at 11:15 AM, Jeremy Lumby <[log in to unmask]> wrote: >> Jay, >> >> >> >> Can we get new port assignments for the 4 1G optical ports >> on the 4200 to move them to the 4550. Also I would propose plugging one of >> the route servers into the 4500 to spread them across 2 stacks, so if you >> agree, please assign a port for that as well. Also if you have permission, >> can you post the maintenance to the Announce list? >> >> >> >> Jeremy >> >> >> >> From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Ryan >> Goldberg >> Sent: Thursday, September 29, 2016 11:07 AM >> To: [log in to unmask] >> Subject: Re: [MICE-DISCUSS] EX4200 (1G Switch) Packet Loss -> 10G >> Participants >> >> >> >> No sfp slots available on the 4200. It can only run the two 10g... >> >> >> On Sep 29, 2016, at 10:50 AM, Matthew Beckwell <[log in to unmask]> wrote: >> >> Jeremy, Thanks for your efforts on this. >> >> Personally, i'm fine with next Tuesday afternoon. I think the general >> consensus was mid-day maintenance is fine, provided we send out something to >> MICE-ANNOUNCE (probably by the end of the day today) so people can shut down >> their sessions in advance if they prefer. >> >> >> >> I don't remember...did we decide if we're moving the 1G Optical folks on the >> existing 4200 expansion module (5 Nines, ClaimLynx, CDW/Berbee, Velocity >> Telephone) to the 4550? >> >> >> >> ~Matthew >> >> >> >> >> >> >> >> On Thu, Sep 29, 2016 at 8:35 AM, Jeremy Lumby <[log in to unmask]> wrote: >> >> As many of you know after Tuesday's meeting, I moved my connection over to >> the new 4200 that was donated by Compudyne. The topology is that the >> existing three switches are connected together in a ring with Juniper >> stacking cables, and then the new 4200 that I am testing has 2 10G ports >> lagged to the existing switches, one of which goes to the 4500, and the >> other goes to the 4550. When I initially connected, I was seeing loss to >> all three of the older switches. The loss was 0.4% to the 4500, and 0.2% to >> the 4200, and the 4550. I then shutdown the LAG port that ran between the >> 4550, and the new 4200. The new loss numbers over a 6 hour period came back >> as 0% to the 4500 and 4200, and 0.2% to the 4550. I then switched it so >> that only the port to the 4550 was active in the LAG group, and the loss >> changed to 0.3% to the 4500, 0.2% to the 4200, and 0% to the 4550. I >> believe this clearly points to the loss being in the stacking of the >> existing switches. My suggested next step would be to schedule a >> maintenance window where the existing members are moved from the old 4200 to >> the new one, and the LAG port from the new 4200 to the 4550 is left >> shutdown. This will enable the existing 4200 users to experience less loss, >> while we can see if removing the old 4200, and associated stacking cables >> has removed the loss from the existing stack. Because of my limited >> availability I am proposing doing the maintenance next Tuesday afternoon. >> Let me know if this works, or if someone else with better availability would >> rather do it. It should only briefly effect the 1G members, and not the 10G >> users. I plan on moving the route servers one at a time leaving plenty of >> time for BGP to re-establish prior to moving the second one. >> >> >> Jeremy Lumby >> Minnesota VoIP >> 9217 17th Ave S >> Suite 216 >> Bloomington, MN 55425 >> Main: 612-355-7740 x211 >> Direct: 612-392-6814 >> EFax: 952-873-7425 >> [log in to unmask] >> >> >> >> >> >> ________________________________ >> >> To unsubscribe from the MICE-DISCUSS list, click the following link: >> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 >> >> >> >> ________________________________ >> >> To unsubscribe from the MICE-DISCUSS list, click the following link: >> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 >> >> >> ________________________________ >> >> To unsubscribe from the MICE-DISCUSS list, click the following link: >> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > > > -- > Jay Hanke > CTO > Neutral Path Communications > 3 Civic Center Plaza, Suite 204 > Mankato, MN 56001 > (507) 327-2398 mobile > [log in to unmask] > www.neutralpath.net -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile [log in to unmask] www.neutralpath.net