Does the show virtual-chassis vc-path command work for LAG bundles?
Specifically-- I know I'm also getting loss to Hurricane (ae6), and not to
CNS (ae5).
I'd be curious to see these:
show virtual-chassis vc-path source-interface ge-1/0/15
destination-interface ae5
show virtual-chassis vc-path source-interface ge-1/0/15
destination-interface ae6
Additionally, I know I'm not getting loss to University of Wisconsin
(xe-2/0/11) or Compudyne (xe-0/0/35), so this might be interesting as well.
show virtual-chassis vc-path source-interface ge-1/0/15
destination-interface xe-2/0/11
show virtual-chassis vc-path source-interface ge-1/0/15
destination-interface xe-0/0/35
The pattern I'm seeing so far is loss on the first half of the 4500 from
the 4200.
~Matthew
On Tue, Sep 20, 2016 at 11:23 AM, Jeremy Lumby <[log in to unmask]> wrote:
> Here is the switch output:
>
>
>
> {master:1}
>
> jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11
>
> vc-path from ge-1/0/15 to xe-2/0/11
>
> Hop Member PFE-Device Interface
>
> 0 1 4 ge-1/0/15
>
> 1 2 6 xe-2/0/11
>
>
>
> {master:1}
>
> jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/14
>
> vc-path from ge-1/0/15 to xe-0/0/14
>
> Hop Member PFE-Device Interface
>
> 0 1 4 ge-1/0/15
>
> 1 2 6 vcp-1
>
> 2 0 0 xe-0/0/14
>
>
>
> {master:1}
>
> jlumby@MICE-SW1> ...-interface ge-1/0/11 destination-interface xe-0/0/8
>
> vc-path from ge-1/0/11 to xe-0/0/8
>
> Hop Member PFE-Device Interface
>
> 0 1 4 ge-1/0/11
>
> 1 2 6 vcp-1
>
> 2 0 0 xe-0/0/8
>
>
>
