Yeah, we should set aside the ae5 test data for the moment...because I agree it's confusing when it's split across 2 switches. I'd have to rely on someone who speaks Juniper as to what the various paths mean.... "vcp-1" vs "internal-1/24" vs nothing?... Although- it looks like so far all the paths with loss seem to have "vcp-1" in them? ~Matthew On Tue, Sep 20, 2016 at 1:28 PM, Jeremy Lumby <[log in to unmask]> wrote: > Matthew, > > > > The switch throws out an error if I set the destination > port as an agg port. However I did all of their member ports individually > if that helps you. Personally I think AE bundles on different switches > should probably be ignored as data points to keep the troubleshooting > straightforward. > > > > jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11 > > vc-path from ge-1/0/15 to xe-2/0/11 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 2 6 xe-2/0/11 > > > > {master:1} > > jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/35 > > vc-path from ge-1/0/15 to xe-0/0/35 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 1 3 internal-1/24 > > 2 0 1 xe-0/0/35 > > > > {master:1} > > jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/3 > > vc-path from ge-1/0/15 to xe-0/0/3 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 2 6 vcp-1 > > 2 0 0 xe-0/0/3 > > > > {master:1} > > jlumby@MICE-SW1> ...e-interface ge-1/0/15 destination-interface xe-0/0/13 > > vc-path from ge-1/0/15 to xe-0/0/13 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 2 6 vcp-1 > > 2 0 0 xe-0/0/13 > > > > {master:1} > > jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/29 > > vc-path from ge-1/0/15 to xe-0/0/29 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 1 3 internal-1/24 > > 2 0 1 xe-0/0/29 > > > > {master:1} > > jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/38 > > vc-path from ge-1/0/15 to xe-0/0/38 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 1 3 internal-1/24 > > 2 0 1 xe-0/0/38 > > > > {master:1} > > jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-2/0/15 > > vc-path from ge-1/0/15 to xe-2/0/15 > > Hop Member PFE-Device Interface > > 0 1 4 ge-1/0/15 > > 1 2 6 xe-2/0/15 >