LISTSERV 16.0 - MICE-DISCUSS Archives

Does the show virtual-chassis vc-path command work for LAG bundles?

Specifically-- I know I'm also getting loss to Hurricane (ae6), and not to CNS (ae5).

I'd be curious to see these:

show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface ae5

show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface ae6

Additionally, I know I'm not getting loss to University of Wisconsin (xe-2/0/11) or Compudyne (xe-0/0/35), so this might be interesting as well.

show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface xe-2/0/11

show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface xe-0/0/35

The pattern I'm seeing so far is loss on the first half of the 4500 from the 4200.

~Matthew

On Tue, Sep 20, 2016 at 11:23 AM, Jeremy Lumby <[log in to unmask]> wrote:

Here is the switch output:

{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11
vc-path from ge-1/0/15 to xe-2/0/11
Hop   Member PFE-Device Interface
0       1         4       ge-1/0/15
1       2         6       xe-2/0/11

{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/14
vc-path from ge-1/0/15 to xe-0/0/14
Hop   Member PFE-Device Interface
0       1         4       ge-1/0/15
1       2         6       vcp-1
2       0         0       xe-0/0/14

{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/11 destination-interface xe-0/0/8
vc-path from ge-1/0/11 to xe-0/0/8
Hop   Member PFE-Device Interface
0       1         4       ge-1/0/11
1       2         6       vcp-1
2       0         0       xe-0/0/8