Matthew,
The switch throws out an error if I set the destination port as an agg port. However I did all of their member ports individually if that helps you. Personally I think AE bundles on different switches should probably be ignored as data points to keep the troubleshooting straightforward.
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11
vc-path from ge-1/0/15 to xe-2/0/11
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 xe-2/0/11
{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/35
vc-path from ge-1/0/15 to xe-0/0/35
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/35
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/3
vc-path from ge-1/0/15 to xe-0/0/3
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 vcp-1
2 0 0 xe-0/0/3
{master:1}
jlumby@MICE-SW1> ...e-interface ge-1/0/15 destination-interface xe-0/0/13
vc-path from ge-1/0/15 to xe-0/0/13
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 vcp-1
2 0 0 xe-0/0/13
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/29
vc-path from ge-1/0/15 to xe-0/0/29
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/29
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/38
vc-path from ge-1/0/15 to xe-0/0/38
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/38
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-2/0/15
vc-path from ge-1/0/15 to xe-2/0/15
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 xe-2/0/15
From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Matthew Beckwell
Sent: Tuesday, September 20, 2016 1:17 PM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] EX4200 (1G Switch) Packet Loss -> 10G Participants
Does the show virtual-chassis vc-path command work for LAG bundles?
Specifically-- I know I'm also getting loss to Hurricane (ae6), and not to CNS (ae5).
I'd be curious to see these:
show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface ae5
show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface ae6
Additionally, I know I'm not getting loss to University of Wisconsin (xe-2/0/11) or Compudyne (xe-0/0/35), so this might be interesting as well.
show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface xe-2/0/11
show virtual-chassis vc-path source-interface ge-1/0/15 destination-interface xe-0/0/35
The pattern I'm seeing so far is loss on the first half of the 4500 from the 4200.
~Matthew
On Tue, Sep 20, 2016 at 11:23 AM, Jeremy Lumby <[log in to unmask]> wrote:
Here is the switch output:
{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11
vc-path from ge-1/0/15 to xe-2/0/11
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 xe-2/0/11
{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/14
vc-path from ge-1/0/15 to xe-0/0/14
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 vcp-1
2 0 0 xe-0/0/14
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/11 destination-interface xe-0/0/8
vc-path from ge-1/0/11 to xe-0/0/8
Hop Member PFE-Device Interface
0 1 4 ge-1/0/11
1 2 6 vcp-1
2 0 0 xe-0/0/8
To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1