Assuming it is the same problem as before, does it just need a new SFP or a new RJ45 end on the cable? US Internet would be happy to donate either as needed.
________________________________________
From: MICE Discuss [[log in to unmask]] on behalf of Doug McIntyre [[log in to unmask]]
Sent: Monday, December 19, 2016 5:55 PM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] RR#2 cable?
Sure, in the MICE cabinet (which I'm not sure of the number, it is in the
row parallel against the back wall in Suite 100 farthest way from the entry
door, in the top of a 1/3rd cabinet with MICE name on a label..)
On the EX4550 switch (there's only one EX4550 switch, it is the 1U fiber switch),
in port ge-2/0/0 (ie. the first port), is a copper SFP (again, the only one there is).
All that needs to happen is to push that copper cross-connect in, the spring
action has probably pushed it just a little too far out for good contact.
That is what it was last time.
And I think in general we should probably move that copper connection back to
the copper switches, but for now, just pushing it in would be good to go.
On Mon, Dec 19, 2016 at 05:42:33PM -0600, Dean Bahls wrote:
> We have someone going down there in about an hour or two. He's never been
> in that cabinet so if you have VERY EXPLICIT instructions, we can have him
> do it.
>
> Lemme know.
>
> Dean
>
>
> -----Original Message-----
> From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Doug
> McIntyre
> Sent: Monday, December 19, 2016 5:37 PM
> To: [log in to unmask]
> Subject: [MICE-DISCUSS] RR#2 cable?
>
> Anybody close to 511 today?
>
> Looks like the cable has snaked its way out again for RR#2.
>
> Dec 19 17:04:19 micemn-02 kernel: bge1: link state changed to DOWN
>
> The machine is up and talking back on the mgmt link. It is link down on both
> the switch and the machine for the link into the switch stack.
>
> I'm sure if somebody goes and pushes on the cable again it'll be link up.
>
> Looks like that cable and that copper-SFP aren't too compatico.
> It might be better to not have switch diversity for them.
>
> --
> Doug McIntyre <[log in to unmask]>
> ~.~ ipHouse ~.~
> Network Engineer/Provisioning/Jack of all Trades
--
Doug McIntyre <[log in to unmask]>
~.~ ipHouse ~.~
Network Engineer/Provisioning/Jack of all Trades
