Print

Print


Wouldn't that be like a $200+ client solution?  Seems relatively high is the issue or am I looking at it wrong.  I know that Vantage Point is pretty costly when your talking about 100+ or whatever the number is clients.   


Jeff

-----Original Message-----
From: MICE Discuss <[log in to unmask]> On Behalf Of Lubitz, Jake (MNIT)
Sent: Monday, February 25, 2019 10:05 AM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] MICE attached compliance speed test server

+1 on the NUC. The Raspi 3B+ USB ports and Ethernet port all share an USB 2.0 bus. So at most, you may see up to 300Mbps of throughput on the Raspi. I've tried iperf and speedtest-cli on the Raspi and never got over 200Mbps on a 1Gbps WAN connection.

Jake

-----Original Message-----
From: MICE Discuss <[log in to unmask]> On Behalf Of Chris Wopat
Sent: Monday, February 25, 2019 9:50 AM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] MICE attached compliance speed test server

On 2/25/19 9:46 AM, Shaun Carlson wrote:
> I was looking at a couple of options for Raspberry Pi, but haven't 
> built anything yet.  Have you?

Pi starting with model 3b+ can link at gigabit, but cannot do anywhere near that speed.

If the goal is something small, one would likely have to go with a real
x86 based thing, perhaps an intel NUC:

https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.intel.com%2Fcontent%2Fwww%2Fus%2Fen%2Fproducts%2Fboards-kits%2Fnuc.html&data=02%7C01%7Cjake.lubitz%40STATE.MN.US%7Cc2e4cf77f1ad48fd219608d69b38e61f%7Ceb14b04624c445198f26b89c2159828c%7C0%7C1%7C636867066011307927&sdata=ozQrker2bPycc4VmX50dfQOwRtuyotBy5dPTqqs1kWY%3D&reserved=0


--
Chris Wopat
Network Engineer, WiscNet
[log in to unmask]   608-210-3965