The main reason is because mice is 100% volunteer and it is difficult
to get volunteers to come in in the middle of the night
Jeremy Lumby
Minnesota VoIP
9217 17th Ave S
Suite 216
Bloomington MN 55425
Main 612-355-7740
Direct 612-392-6814
EFax 952-873-7425
[log in to unmask]
-------- Original message --------
From: Ryan Malek <[log in to unmask]>
Date: 4/16/20 5:43 PM (GMT-06:00)
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
_____
From : Ryan Malek [[log in to unmask]]
To : [log in to unmask] [[log in to unmask]]
Date : Thursday, April 16 2020 17:43:42
I hope this isn't a stupid question... but why was this done at 5PM?
I found out in a very brutal manner that something is wrong with my BGP
set up...
_____
Ryan Malek - Router12 Networks LLC
Internet, Phone, and Hosted Services
Ph. 641.420.7180
On 4/16/2020 5:29 PM, Jeremy Lumby wrote:
The maintenance has completed, and everything appears to be
returning to normal.
-----Original Message-----
From: Jeremy Lumby [mailto:[log in to unmask]]
Sent: Thursday, April 16, 2020 4:14 PM
To: MICE Discuss
Subject: RE: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
Sorry guys, I am running a bit behind, so this will end up
being closer to 5PM anyway...
-----Original Message-----
From: Jeremy Lumby [mailto:[log in to unmask]]
Sent: Thursday, April 16, 2020 11:10 AM
To: MICE Discuss
Subject: RE: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
It is the MICE core. I would be willing to move it to 5PM CDT,
however I would want the board to give their blessing since it was
already announced for 4PM
-----Original Message-----
From: MICE Discuss [mailto:[log in to unmask]] On
Behalf Of James Urwiller
Sent: Thursday, April 16, 2020 11:07 AM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
This is on the mice core? Or the USInternet switch.. are they
one in the
same? Im confused.
James Urwiller
Network Architect
Stealth Broadband
[log in to unmask]
-----Original Message-----
From: MICE Discuss <[log in to unmask]>
On Behalf Of Jeremy
Lumby
Sent: Thursday, April 16, 2020 11:01
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
Correct, any port number starting with 3/ is on the card.
-----Original Message-----
From: MICE Discuss [mailto:[log in to unmask]] On
Behalf Of
Gary Glissendorf
Sent: Thursday, April 16, 2020 10:58 AM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
Jermey which card is the 100G. is it slot 3
Gary Glissendorf | Network Architect
[log in to unmask]
-----Original Message-----
From: MICE Discuss <[log in to unmask]>
On Behalf Of Jeremy
Lumby
Sent: Wednesday, April 15, 2020 5:56 PM
To: [log in to unmask]
Subject: [MICE-DISCUSS] 100G Linecard EMERGENCY MAINTENANCE
| CAUTION: This
email originated from outside of SDN Communications. Exercise
caution when
opening attachments or clicking links, especially from unknown
senders. |
In troubleshooting the 100G line card, Arista has requested
that the line
card be power cycled. Being that there is a possibility that
the line
card would not recover from a restart, I am working with Dave @
the UofM
to have a spare available in the event that the card fails to
restart. I
plan on blocking BGP to all ports on the card before restarting
the card.
Based on the current state of the card, I am unsure that it
will block BGP
properly. I plan on restarting the card tomorrow at 4PM CDT.
In the past
I have noticed that the 100G cards take a long time to boot up,
so I would
anticipate a minimum of 15 minutes of downtime if everything
goes
perfectly.
Jeremy Lumby
Minnesota VoIP
9217 17th Ave S #216
Bloomington, MN 55425
M: 612-355-7740
D: 612-392-6814
F: 952-873-7425
[log in to unmask]
-----Original Message-----
From: Jeremy Lumby [mailto:[log in to unmask]]
Sent: Wednesday, April 15, 2020 4:18 PM
To: MICE Discuss
Subject: 100G Linecard
I wanted to let everyone know that we are experiencing an issue
with the
100G linecard on the MICE Arista core switch. The card is
currently
outputting errors and not detecting new optics. I am currently
working
with Arista to troubleshoot the issue. At the moment any 100G
upgrades
would need to be on hold until the issue is resolved. All
established
connections seem to be working fine. I will report back as
soon as I have
more information.
Jeremy Lumby
Minnesota VoIP
9217 17th Ave S #216
Bloomington, MN 55425
M: 612-355-7740
D: 612-392-6814
F: 952-873-7425
[log in to unmask]
***This message and any attachments are solely for the intended
recipient.
If you are not the intended recipient, disclosure, copying, use
or
distribution of the information included in this message is
prohibited --
Please immediately and permanently delete.***
