Connectivity should have been restored around 6 PM.
Ben Wiechman
Director of IP Strategy and Engineering
Direct: 320.256.0184
Cell: 320.247.3224
[log in to unmask]
150 Second Street SW | Perham, MN 56573 | arvig.com
On Thu, Sep 10, 2020, 17:05 Ben Wiechman <[log in to unmask]> wrote:
> One tail of the fiber is out and the new fiber is prepared. ETR is around
> 19:00.
>
> Ben Wiechman
>
> Director of IP Strategy and Engineering
>
> 320.247.3224 | [log in to unmask]
>
> Arvig | 224 East Main Street | Melrose, MN 56352 | arvig.com
>
>
>
>
> On Thu, Sep 10, 2020 at 4:53 PM Ben Wiechman <[log in to unmask]>
> wrote:
>
>> Construction and splice crews are still in route. No ETR.
>>
>> Ben Wiechman
>>
>> Director of IP Strategy and Engineering
>>
>> 320.247.3224 | [log in to unmask]
>>
>> Arvig | 224 East Main Street | Melrose, MN 56352 | arvig.com
>>
>>
>>
>>
>> On Thu, Sep 10, 2020 at 2:29 PM Ben Wiechman <[log in to unmask]>
>> wrote:
>>
>>> There appears to be a cut around Floodwood. Technicians arrived on site
>>> to identify the specific location of the cut/break about 20 minutes ago. No
>>> ETR yet.
>>>
>>> Ben Wiechman
>>>
>>> Director of IP Strategy and Engineering
>>>
>>> 320.247.3224 | [log in to unmask]
>>>
>>> Arvig | 224 East Main Street | Melrose, MN 56352 | arvig.com
>>>
>>>
>>>
>>>
>>> On Thu, Sep 10, 2020 at 1:38 PM Lou Pliml <[log in to unmask]> wrote:
>>>
>>>> The MICE Duluth extension switch is offline due to a yet confirmed
>>>> fiber cut. Arvig reports that they have lost light on the connection and
>>>> have technicians on the way to investigate.
>>>>
>>>> There is no ETR at this time
>>>>
>>>>
>>>>
>>>> Louis Pliml | Network Services Administrator
>>>>
>>>> Compudyne | 306 W Michigan Street – Suite 200 | Duluth, MN 55802
>>>>
>>>> [log in to unmask] | 218.216.6938 | compudyne.com
>>>>
>>>>
>>>> Duluth | Hibbing | Saint Paul | Marquette | Houghton
>>>>
>>>> ------------------------------
>>>>
>>>> To unsubscribe from the MICE-DISCUSS list, click the following link:
>>>> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
>>>>
>>>
