Yes, but I'll go do it again.
That part of the config hasn't been changed since initial setup.
On Fri, Apr 30, 2021 at 01:01:00PM +0000, Frank Bulk wrote:
>Has someone HUP’d it, yet?
>
>Frank
>
>From: MICE Discuss <[log in to unmask]> On Behalf Of Andrew Hoyos
>Sent: Tuesday, April 27, 2021 12:54 PM
>To: [log in to unmask]
>Subject: Re: [MICE-DISCUSS] Zayo Belle Plaine - April 15th
>
>Same here. Perhaps the BFD daemon on rs2 needs to be HUP’d to pick up values in config file?
>
>
> Detect Transmit
>Address State Interface Time Interval Multiplier
>2001:504:27::d1af:0:1 Up xe-0/1/0.0 1.500 0.500 3
> Client BGP, TX interval 0.500, RX interval 0.500
> Session up time 2w1d 16:53:02, previous down time 00:00:00
> Local diagnostic None, remote diagnostic None
> Remote state Up, version 1
> Session type: Single hop BFD
> Min async interval 0.500, min slow interval 1.000
> Adaptive async TX interval 0.500, RX interval 0.500
> Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3
> Remote min TX interval 0.500, min RX interval 0.500, multiplier 3
> Local discriminator 19, remote discriminator 2630753610
> Echo mode disabled/inactive Session ID: 0x0
>
> Detect Transmit
>Address State Interface Time Interval Multiplier
>2001:504:27::d1af:0:2 Up xe-0/1/0.0 2.500 0.500 3
> Client BGP, TX interval 0.500, RX interval 0.500
> Session up time 2w1d 16:52:42, previous down time 00:00:00
> Local diagnostic None, remote diagnostic None
> Remote state Up, version 1
> Session type: Single hop BFD
> Min async interval 0.500, min slow interval 1.000
> Adaptive async TX interval 0.500, RX interval 0.500
> Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3
> Remote min TX interval 0.100, min RX interval 0.010, multiplier 5
> Local discriminator 20, remote discriminator 3118078092
> Echo mode disabled/inactive Session ID: 0x0
>
>
>
>
>
>
>On Apr 27, 2021, at 12:27 PM, Justin Krejci <[log in to unmask]> wrote:
>
>We are not getting identical BFD timers or multiplier values from RS1 and RS2.
>
>(added blank lines for readability)
>usi-cr02-mpls#show bfd peers bfd interface ethernet24/1 detail | i ^Peer|^Received|^TxI
>Peer Addr 206.108.255.1, Intf Ethernet24/1, Type normal, State Up
>TxInt: 500, RxInt: 500, Multiplier: 3
>Received RxInt: 500, Received Multiplier: 3
>Peer Addr 206.108.255.2, Intf Ethernet24/1, Type normal, State Up
>TxInt: 500, RxInt: 500, Multiplier: 3
>Received RxInt: 10, Received Multiplier: 5
>Peer Addr 2001:504:27::d1af:0:1, Intf Ethernet24/1, Type normal, State Up
>TxInt: 500, RxInt: 500, Multiplier: 3
>Received RxInt: 500, Received Multiplier: 3
>Peer Addr 2001:504:27::d1af:0:2, Intf Ethernet24/1, Type normal, State Up
>TxInt: 500, RxInt: 500, Multiplier: 3
>Received RxInt: 10, Received Multiplier: 5
>
>
>
>
>________________________________
>To unsubscribe from the MICE-DISCUSS list, click the following link:
>http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
>
>
>________________________________
>
>To unsubscribe from the MICE-DISCUSS list, click the following link:
>http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
