Same here. Perhaps the BFD daemon on rs2 needs to be HUP’d to pick up values in config file?
Detect Transmit
Address State Interface Time Interval Multiplier
2001:504:27::d1af:0:1 Up xe-0/1/0.0 1.500 0.500 3
Client BGP, TX interval 0.500, RX interval 0.500
Session up time 2w1d 16:53:02, previous down time 00:00:00
Local diagnostic None, remote diagnostic None
Remote state Up, version 1
Session type: Single hop BFD
Min async interval 0.500, min slow interval 1.000
Adaptive async TX interval 0.500, RX interval 0.500
Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3
Remote min TX interval 0.500, min RX interval 0.500, multiplier 3
Local discriminator 19, remote discriminator 2630753610
Echo mode disabled/inactive Session ID: 0x0
Detect Transmit
Address State Interface Time Interval Multiplier
2001:504:27::d1af:0:2 Up xe-0/1/0.0 2.500 0.500 3
Client BGP, TX interval 0.500, RX interval 0.500
Session up time 2w1d 16:52:42, previous down time 00:00:00
Local diagnostic None, remote diagnostic None
Remote state Up, version 1
Session type: Single hop BFD
Min async interval 0.500, min slow interval 1.000
Adaptive async TX interval 0.500, RX interval 0.500
Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3
Remote min TX interval 0.100, min RX interval 0.010, multiplier 5
Local discriminator 20, remote discriminator 3118078092
Echo mode disabled/inactive Session ID: 0x0
> On Apr 27, 2021, at 12:27 PM, Justin Krejci <[log in to unmask]> wrote:
>
> We are not getting identical BFD timers or multiplier values from RS1 and RS2.
>
> (added blank lines for readability)
> usi-cr02-mpls#show bfd peers bfd interface ethernet24/1 detail | i ^Peer|^Received|^TxI
>
> Peer Addr 206.108.255.1, Intf Ethernet24/1, Type normal, State Up
> TxInt: 500, RxInt: 500, Multiplier: 3
> Received RxInt: 500, Received Multiplier: 3
>
> Peer Addr 206.108.255.2, Intf Ethernet24/1, Type normal, State Up
> TxInt: 500, RxInt: 500, Multiplier: 3
> Received RxInt: 10, Received Multiplier: 5
>
> Peer Addr 2001:504:27::d1af:0:1, Intf Ethernet24/1, Type normal, State Up
> TxInt: 500, RxInt: 500, Multiplier: 3
> Received RxInt: 500, Received Multiplier: 3
>
> Peer Addr 2001:504:27::d1af:0:2, Intf Ethernet24/1, Type normal, State Up
> TxInt: 500, RxInt: 500, Multiplier: 3
> Received RxInt: 10, Received Multiplier: 5
>
>
>
>
>
>
> To unsubscribe from the MICE-DISCUSS list, click the following link:
> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
