Thanks, ill give that a whirl!
James Urwiller
Network Architect
Stealth Broadband
[log in to unmask]
-----Original Message-----
From: MICE Discuss <[log in to unmask]> On Behalf Of Jeremy
Lumby
Sent: Wednesday, December 30, 2020 14:23
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] config assistance?
James,
Arista is very similar to Cisco where you need to issue no bgp
enforce-first-as or a slight variation of it (if I do not have my Arista
syntax exactly correct).
Jeremy
From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of
James Urwiller
Sent: Wednesday, December 30, 2020 2:14 PM
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] config assistance?
Greetings all!
I just realized that my peer sessions with the route servers
are not receiving any prefix’s since the change. My direct peers through
the exchange are working as intended. Is there another filter someplace
that needs updated?
James Urwiller
Network Architect
Stealth Broadband
[log in to unmask]
From: MICE Discuss <[log in to unmask]> On Behalf Of Jeremy
Lumby
Sent: Tuesday, December 29, 2020 12:16
To: [log in to unmask]
Subject: Re: [MICE-DISCUSS] config assistance?
James,
This is because Zayo is a non-compliant extension switch
operator. There have been several things approved by the MICE board that
Zayo has become non-responsive on implementing. As a result we needed to
put a MAC filter in place on Zayo’s link to the MICE core. You can let me
know your new MAC address, and I can update the filter. Also there are some
other things related to route server security coming up shortly that will
become an issue on the Zayo extension switch. If you have a good contact
there, we would love to have them work with us.
Jeremy
From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of
James Urwiller
Sent: Tuesday, December 29, 2020 12:04 PM
To: [log in to unmask]
Subject: [MICE-DISCUSS] config assistance?
Greetings all,
Last night I cutover to a new Arista for BGP services facing
MICE and a few other peers. All my other peers are up and functioning
properly, but I cannot reach any of the MICE peers. Since I am connected to
the Zayo remote switch in Belle Plaine, I had Zayo bounce my port thinking
it was a mac-limit issue. Even before they did this, I can see MICE peers
in ARP and in the MAC-Table, but I cant ping any of them, like the traffic
is filtered in one direction. Zayo’s port bouncing had no effect.
Any ideas Arista/MICE guru’s?
James Urwiller
Network Architect
Stealth Broadband
[log in to unmask]
________________________________________
To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
________________________________________
To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
________________________________________
To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
|