On 5/25/11 11:07 CDT, Jay Hanke wrote:
>> Did you check that the Data Source for the graph is also using the
>> 64-bit counters?
>>
>>>
>>> Nothing special in logs either showing a problem.
>>>
>>> Steve - your own monitoring showing problems at all with data
>
> Are you looking at Gi-0/2?
it is possible this is a problem on the Cisco side too, that port Gi-0/2
on the 3560E got changed to being in a port channel sometime this
creates weird issues. They usually go away after a reboot.
> Usually SNMPv1 issues will appear at right about 100 Mb/s on a five
> minute average. We're pulling the po1 interface well over a Gig
> without an issue. Also, the traffic will show up with spike and then
> nothing (when the counter rolls over).
>
> Jay
>
> ########################################################################
>
> To unsubscribe from the MICE-DISCUSS list, click the following link:
> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
--
===============================================
David Farmer Email:[log in to unmask]
Networking & Telecommunication Services
Office of Information Technology
University of Minnesota
2218 University Ave SE Phone: 612-626-0815
Minneapolis, MN 55414-3029 Cell: 612-812-9952
===============================================
########################################################################
To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
|