If the servers are using NEMA 5-20P plugs (20A), we should make sure that we are not
overloading any of the PDUs based on the number of servers and their actual load.

20P plugs are one horizontal and one vertical. If they have two vertical prongs, then
they are NEMA 5-15P plugs which are much more likely on servers that are not
drawing very high amperages.

Owen

On Sep 28, 2011, at 2:28 PM, Anthony Anderberg wrote:

> Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords.
>
> Just to be sure - ten receptacles are enough?
>
>
> Anthony Anderberg
> Sr. Systems Analyst
> 320-234-5239
> [log in to unmask]
> www.nutelecom.net
>
>
> -----Original Message-----
> From: MICE Discuss [mailto:[log in to unmask]] On Behalf Of Jay Hanke
> Sent: Wednesday, September 28, 2011 3:54 PM
> To: [log in to unmask]
> Subject: Re: [MICE-DISCUSS] Akamai Cluster Help
>
>> What kind of plugs (volt/amp) do those PDUs need to be?
>> I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V.
>>
>
> I've got all the servers in the rack and cabled to the switches.
>
> All the servers are 110 VAC so those would work great. What kind of
> plug is on the cord?
>
> Jay
>
> ########################################################################
>
> To unsubscribe from the MICE-DISCUSS list, click the following link:
> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
>
> ########################################################################
>
> To unsubscribe from the MICE-DISCUSS list, click the following link:
> http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

########################################################################

To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1